In-Stock Rifles
All firearms must ship to a FFL or be picked up in person after filling out a form 4473.
Zermatt Origin (Bighorn) action in .300 PRC
— Bryant Custom Rifle -SOLD — scope not included.
No waiting to be built. Get a proven shooter!!!!
This rifle is built on a Zermatt Origin action (formerly known as Bighorn Origin), pillar bedded into a AG Composites Privateer stock in black paint. The Bartlein #4 contour Carbon fiber barrel is crowned at 24″ with a Lil Beast Titanium 5/8-24 4 port brake installed. Suppressor ready. Triggertech trigger is breaking at a crisp 1.5 pound pull weight, but can readily be adjusted from 1.5 pounds to 3.5 pound pull weight depending upon owner preference. The stainless and titanium parts of the barrel and the Pacific BDL trigger guard have been cerakoted in Elite Blackout. The rifle weighs 7 pounds 2 ounces without the scope. It feeds the Eld Match ammunition flawlessly with the Origin controlled round feed action. It is priced at $4995 shipping included. The Schmidt & Bender scope in the photo is not included. Because of the current ammo shortages, I am including two boxes of Hornady factory ammo the same number (#82162) as I used to test fire the rifle for accuracy. The ammunition will have to be shipped separately from the rifle as shipping regulations don’t allow ammunition to be shipped with a firearm. All firearms have to be shipped to your FFL dealer or picked up in person at my shop. All federal firearms regulations apply.
This rifle was fired a total of three shots to test for quality control and accuracy using Hornady .300 PRC 225 Grain ELD Match ammo, resulting in a 0.517″ group.
Get Notified of New
In-Stock Rifles!
Defiance Tenacity in 6mm Creedmoor
A new custom 6mm Creedmoor built on a Defiance Tenacity action It includes a Bartlein #3B contour 1:8 twist stainless barrel, featuring a 5/8-24 threaded Harrell tactical brake. So it is ready to be shot with your suppressor. The Triggertech trigger has been set to a crisp 1.5 pound pull. The stock is a AG Composites Sportsman stock. All metal work has been cerakoted in Elite Smoke. The rifle is currently being featured in the Custom Corner in the May 2022 issue of Rifle Magazine https://www.riflemagazine.com/custom-corner-19 . It is for sale at Oldham Trading Company in Shamrock, TX. If you are interested in the rifle, give Clifford a call at (806) 256-2511.
This rifle was built to be photographed and featured in the Custom Corner of Rifle Magazine (no firing), but I test fire my rifles for quality control and accuracy. On a blustery with 20 mph cross wind, I fired a total of three shots for a half inch group, called it done and shipped it out to be photographed. It’s back from its modeling gig and ready for a new home.