Bryant Custom Precision Riflesmithing   Bryant Custom Precision Riflesmithing
About Us Custom Rifles Riflesmith Services Price List Photo Gallery Articles Links

Complete Price List

To place an order, call 806-826-5618 or by e-mail though the Contact Us link at the top of this page.

Prices are subject to change. All costs are plus shipping. I will try to ship the most economical way unless you
want shipping by a faster method, ie. next day or 2nd day air.

I no longer accept credit card payment.

Upon completion of work done on your rifle, the balance owed will be due before the rifle is shipped. Any rifle that
has not been paid in full within 45 days of completion of the work done will be considered the property of
Bryant Custom LLC and will be sold to pay for the balance owed on the rifle.
I send invoices first by e-mail or then by
U.S. Mail, if I do not have a response stating that the invoice was received by e-mail. I will make every attempt to
contact the owner upon completion of the rifle. This is usually not a problem as most owners are ready for their rifles
upon completion.

I prefer not work on someone else's problem. If you have a custom rifle built by another builder and can't get it
to shoot, you need to contact that builder and work it out with him. While I can correct someone else's problem,
it is better if you can work it out with him as it's work that you have already paid to have done once.

You have 30 days approval from when you receive the rifle back from having work done. During this time if there is anything
that has not been done to your satisfaction, I will work with you to make sure that it's done to your satisfaction. After 30 days,
it will be assumed that all work was done to the customer's satisfaction and any additional work that you want done will be
charged at the going rate.

Price List Effective as of February 11, 2016. This page reflects current pricing. If another page of this web site shows another pricing, that page isn't up to date and pricing on this page applies.

I specialize in building exceptional rifles on Remington
700 actions and benchrest quality custom actions.

Complete rifle built on your action with all customer supplied parts, package priced

 

Magazine fed Hunting or Varmint rifle with you supplying all the parts built on your Remington action
From $1000.00

Package includes Complete truing of Remington 700 action, Pillar bedded, You supply the following: Remington action complete with all magazine parts, barrel, McMillan inletted stock blank and trigger. If you send a stock other than a preinletted McMillan or H-S Precision, it will cost more to build the rifle.

Magazine fed Hunting or Varmint rifle with you supplying all the parts built on your custom Remington clone action
From $850.00
Package includes pillar bedding on most fiberglass stocks (glass bedded to aluminum bedding block stock) You supply the following: custom Remington clone action such as Stiller Predator, Tac, Borden Alpine, Timberline, Bat VR, Defiance Stryker Ridge, Kelbly Atlas with all magazine parts and trigger guard, barrel, McMillan inletted stock blank and trigger. If you send a stock other than a preinletted McMillan or H-S Precision, it will cost more to build the rifle.
Long Range Benchrest rifle with you supplying all the parts built on your custom action
From $900.00
Package includes pillar bedding on most fiberglass stocks ,You supply the following: custom action, trigger guard, barrel, McMillan MBR inletted stock blank and trigger. If you send a stock other than a preinletted McMillan MBR, it will cost more to build the rifle. Action will be checked for squareness and corrected if necessary. The main difference in pricing between the below benchrest is that normally more inletting is required for the long range benchrest rifles as well as pillar bedding instead of glue in.
NBRSA/IBS Varmint Class Benchrest rifle with you supplying all the parts built on your custom action
From $750.00

Package includes chambering and fitting your LV taper barrel to make weight with your action, stock and scope combination. I recommend McMillan Edge, Bruno McMillan Edge, Leonard and Scarborough stocks or any of the various models of Kelbly benchrest stocks. Also, recommend Shilen, Hart, Krieger and Bartlein barrels. I'd suggest using either a Jewell BR trigger or Bix N Andy trigger. There are some other makers of stocks, barrels and triggers that are very good.

Weight system in Varmint Class BR rife for balance
$150.00

 

For your information, there is more to building a rifle than barreling an action and bedding it to the stock. The above pricing
reflects the extra time necessary for fitting the barreled action to the stock, fitting guard screws to length for proper fit,
checking to make sure that rifle will feed, extract and eject, etc. that is not necessary when just installing a barrel or bedding
an action to the stock.

Any option is available at extra cost from price list below. All pricing above is action not included, with the customer
supplying the complete action and all parts including trigger guard, barrel, stock, trigger and magazine parts if needed.

.:. Top


Rebarreling

Thread, Chamber to minimum headspace, bead blasted finish, Crown and Engrave Caliber and Neck Diameter (if tight necked).

Non Magnum calibers:

$275.00
  • Metric Threads:
  • Magnum chamber:
  • 320 grit Polished finish
  • High Polish on Barrel:Price depends upon smoothness of barrel originally
  • Note: If it is a customer supplied barrel that is not finished turned, that is if the barrel has ridges on the outside of the barrel contour and has to be cleaned up before chambering, there is an additional charge to finish the barrel, depending upon how rough the exterior of the barrel blank is. There is no extra charge on customer supplied Hart, Lilja, Shilen, Broughton or Krieger barrels that are pre-contoured. The extra charge applies to Douglas, Rock, Schnieder and other rough turned barrel blanks.

+$50.00
+$25.00
+$25.00
+$50.00 up

 

+$35.00 up

Chamber gage:
Reamer is run in to the bottom of the shoulder giving the same neck diameter and throat as your chamber. This allows a quick check on neck diameter and also is an easy way to find a starting seating depth. This is only for chambers without special throating, (ie. separate throating reamer).
$25.00
Match Grade 416 Stainless Steel Barrel
  • I have a limited supply of about 40 barrels of various calibers, twist and contour in stock.
From $350.00

Total cost for above stainless steel barrel supplied, fitted and chambered to fit your action.
Action truing cost and return shipping not included. Extra cost options listed in Rebarreling section of this price list.

From $645.00
depending upon the contour and length of the barrel..
Cut off Threads and Re-chamber, Re-thread & Re-crown:
$300.00
Re-Crown, 11o Indicated, Recessed or Flat Target Crown:
(Depending on length of barrel and/or style desired)
$45.00

.:. Top


Action Truing

Truing of Remington Action, This is only offered when building the complete rifle and is not offered as a stand alone.

Square Receiver Face, Square receiver lugs, Threads re-cut. Surface Grind Recoil Lug or replace with Pacific Tool & Gauge recoil lug pinned in place, (your choice), Square bolt face and lugs. Pricing slightly less if you use a Pacific bolt with one piece bolt handle or bolt handle that is already attached instead of having the Remington bolt trued.

Retime 700 bolt handle if necessary(Remove bolt handle, move forward and silver brazed back on, bead blasted finish on stainless actions or refinish bolt handle with gun kote on matte finish actions.)

Square Receiver Face, Square receiver lugs, threads re-cut. Pacific Tool recoil lug pinned in place with USA grade 8 pin. Fitting your customer supplied Pacific or Tubb bolt to receiver with already attached bolt handle. Ream raceway to .705" if needed to fit oversized bolt body. I recommend using a .704" diameter Pacific bolt if you have the raceway reamed to .705" or .703" diameter bolt if you plan to have the receiver and bolt coated with any of the various coatings such as Cerakote or Black T.

Silver braze stainless bolt handle to Pacific bolt if bolt handle comes in not attached to bolt body.

Truing of Howa or Vanguard actions, when done when rebarreling only.

Square Receiver Face, Square receiver lugs, Threads re-cut. Square bolt face and lugs.

 

 

$250.00

 

 

 

$95.00

 

$275.00 and up depending upon what needs to be done.

$95.00

 

$250.00

 

Optional
Bush firing pin hole, reduce firing pin diameter to .062":
$95.00
 
Install Sako Extractor - Remington Only:

Bolt counter-bore is reduced to .125" when done on a rebarrel job allowing the web of the cartridge to fit into the chamber. The old extractor groove is bored out and bushed to the new diameter. This can convert the bolt to be used in whatever size diameter cartridge you want to use. It also prevents problems with the case hanging up in the old extractor groove because its no longer there.
$125.00

Install 700 bolt handle:

Install your Badger Ordnance or similar style bolt knob:
Install Badger Ornance bolt knob with me supplying bolt knob:

 

$75.00
$110.00

Install Removable Muzzle Brake, Vais brake furnished by Bryant Custom
Install Harrell Precision brake with brake furnished by Bryant Custom
Install Harrell Precision Tactical brake with brake furnished by Bryant Custom
Install Customer furnished brake
Indexing of muzzle brake for side port brakes
With Thread protector:

I primarily use Vais brakes, but will install whatever you want as long as I can readily obtain it. The Vais brake is not indexed, nor are Harrell Precision brakes.

$200.00
$150.00
$185.00
$100.00
+$45.00
+$45.00

 

Cerakote Barreled Action
Barreled action coating work is done out of house and includes shipping both ways.

 

$325.00

 

.:. Top


Fiberglass Stock Work

Bed action to H-S or other aluminum bedding block stock:
$125.00
Bed & glue in benchrest stock:
from $250.00
Pillar bed, benchrest or hunting stock:
from $250.00
Additional inletting to above, depends on what needs to be done:
P.O.R.
Install recoil pad, pad not included:
$85.00
Install sling swivel studs:
$55.00
Other rifle work:
$65.00/hr

.:. Top


 


 
 
 
 
Bryant Custom Precision Riflesmithing  
Bryant Custom Precision Riflesmithing